MAX14802CCM+ Overview

Packed in 48-LQFP, the electronic component is convenient for shipping overseas. Advanced packaging method Tray is used to provide high reliability. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature extended to 0°C~70°C TA. There are 48 terminations totally. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. A total of 48 pins are injected into the electrical part body. Based on SPST - NO switching circuits, these analog multiplexers work. 16 circuits are used in this analogue multiplexer. Using the MAX14802 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 48Ohm. For functions related to 48 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 2.7V. The analogue multiplexer could operate on 5μA current. A voltage higher than 500μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 160VIf you are using a dual power supply, you should attach at least 40V.

MAX14802CCM+ Features

1 Channels
Switch Circuit: SPST - NO
5μA Supply Current
-3db Bandwidth: 20MHz

MAX14802CCM+ Applications

There are a lot of Maxim Integrated MAX14802CCM+ Analog Switches & Multiplexers ICs applications.

• Channel Banks
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Frame Relay Equipment
• Remote Powered Equipment
• High-Voltage
• Cellular phones
• Relay replacements
• HDTV
• DVD-R
• USB 1.1 signal switching circuits