Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX1487EEPA+

MAX1487EEPA+

MAX1487EEPA+

Maxim Integrated

8 Terminations5V 8 Pin MAX1487 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

MAX1487EEPA+ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 1999
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Terminal Finish Matte Tin (Sn)
Subcategory Line Driver or Receivers
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number MAX1487
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Nominal Supply Current 500μA
Data Rate 2.5Mbps
Differential Output YES
Output Polarity COMPLEMENTARY
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 1
Duplex Half
Receiver Hysteresis 70mV
Number of Transceivers 1
Receive Delay-Max 200 ns
Simplex/Duplex Half Duplex
Transmit Delay-Max 60 ns
Output Low Current-Max 0.004A
High Level Input Current-Max 0.000002A
Height Seated (Max) 4.572mm
Length 9.375mm
Width 7.62mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $7.312000 $7.312
10 $6.898113 $68.98113
100 $6.507654 $650.7654
500 $6.139296 $3069.648
1000 $5.791789 $5791.789
MAX1487EEPA+ Product Details

MAX1487EEPA+ Overview


Due to the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The Tube package contains this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.It is packaged with 8 pinouts that are market standard for this particular transceiver.Since the base part number MAX1487 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.The driver IC has improved power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Through Hole arrays.It is important to note that this ic receiver had a maximum resolution of 1 bits.There is usually a 1-bit resolution specified for this receiver when it is used.There are two types of input voltage supply available for this IC, 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.There are 1 transceivers in total that this module isolated transceiver implements.

MAX1487EEPA+ Features


Tube package
8 pin count
8 pins
5V power supply

MAX1487EEPA+ Applications


There are a lot of Maxim Integrated MAX1487EEPA+ Drivers/Receivers/Transceivers applications.

  • Wireless access points
  • Wired telephone
  • Switches
  • Radio transmission
  • IP cameras
  • Televisions
  • Satellite radio receiver
  • Datacom networking applications
  • Single fiber bidirectional application
  • Wireless projection application for business talks

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News