MAX15034BAUI+ Overview

In the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller meets most application requirements. For outputs of 2, this dc motor controller is suitable. PMIC packaging is solid with a Tube enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 4.75V~5.5V 5V~28V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at 100kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 28. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Other relevant dc to dc converter ics can be found by searching "MAX15034". Pins number 28 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 5V. A 5.5V voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 25A, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 93.75 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator1MHz has the maximum frequency. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 28V.

MAX15034BAUI+ Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 93.75 %

MAX15034BAUI+ Applications

There are a lot of Maxim Integrated MAX15034BAUI+ DC to DC converter applications.

• Thermal power
• Planers
• Nuclear power plants
• Imported equipment
• Drilling machines
• Electrical distribution systems
• Driver circuits
• Boring machines
• Domestic water pumps
• Digital precision reference circuits