MAX15090EWI+T Overview

In the 28-WFBGA, WLBGA package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 28 terminations total to three.Device BOTTOM is located at the terminal position.The supply voltage 3V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Latched Fault, Thermal Limit describes it.Using a 2.7V~18VV power source should be able to power the device.The MAX15090 family includes it.During operation, 28 pins are used.Hot-swappable device has Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO programmable features.Presently, there is a sufficient supply of 500μA.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.7V so that the device can function normally.The maximum supply current it requires to operate is 0.75mA.Device 12AV has a maximum output.There is an electrical component in this series called VariableSpeed/BiLevel™.

MAX15090EWI+T Features

Features of Latched Fault, Thermal Limit
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
VariableSpeed/BiLevel™ series

MAX15090EWI+T Applications

There are a lot of Maxim Integrated
MAX15090EWI+T hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems