MAX15091AETI+ Overview

In the 28-WFQFN Exposed Pad package you will find it.Channel 1 is currently available.A Tray-shaped package holds it.The 28 terminations total to three.Device QUAD is located at the terminal position.The supply voltage 3V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Auto Retry, Thermal Limit describes it.Using a 2.7V~18VV power source should be able to power the device.During operation, 28 pins are used.Hot-swappable device has Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO programmable features.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.7V so that the device can function normally.Hot Swap is 400μA which is the operative supply current.Consequently, 9A is the maximum output current that can be achieved to meet the operation criteria.There is a maximum current requirement of 3.6mA for it to operate.

MAX15091AETI+ Features

Features of Auto Retry, Thermal Limit
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO

MAX15091AETI+ Applications

There are a lot of Maxim Integrated
MAX15091AETI+ hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems