MAX16008TP+T Overview

There are 20 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 4 channels. To assist you, this PMIC includes 20-WFQFN Exposed Pad functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 4 voltages that have been checked. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 20 pins on IC management. 20 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 45μA. You can always use MAX16008, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 2.5/5V power to work.

MAX16008TP+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
45μA operating supply current

MAX16008TP+T Applications

There are a lot of Maxim Integrated MAX16008TP+T Voltage Supervisors applications.

• Analog circuit
• Electrical fire monitoring system
• Medical-specific isolation transformer
• Personal computers
• Microprocessor system
• Efficient information transmission
• Leakage current detection
• Military electronics
• Multi-voltage system
• Smartphones