MAX16014TT+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. In terms of packaging, power management follows the Tube model. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of 6-WDFN Exposed Pad functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 14V. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. 6 pins make up the power management. There should be a minimum voltage supply (Vsup) of 5.5V for this PMIC. The supply voltage (Vsup) should not exceed 72V volts in this IC power. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector.

MAX16014TT+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 5.5V

MAX16014TT+ Applications

There are a lot of Maxim Integrated MAX16014TT+ Voltage Supervisors applications.

• Analog circuit
• Insulation fault location system
• Fire equipment power monitoring system
• Electric heating appliances
• Power communication system
• Detection of phase imbalance
• Urban rail transit weak current power monitoring
• Sensitive sensors
• Rechargeable batteries
• Military electronics