MAX16021PTET+ Overview

A total of 16 terminals are used to mount this power management. Tube-packaging is used. For your reference, this PMIC includes a list of 16-WQFN Exposed Pad functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 225. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. Pin count of the power management is 16. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. Supplied with a operating current of 1.2μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX16021, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX16021PTET+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
1.2μA operating supply current

MAX16021PTET+ Applications

There are a lot of Maxim Integrated MAX16021PTET+ Voltage Supervisors applications.

• Leakage current detection
• Computer applications
• Battery cars
• Fire equipment power monitoring system
• Kitchen appliances
• Electronics installed in the vehicle
• emergency room
• Network equipment
• Solar power charger
• Display equipment