MAX16034LLB44+T Overview
There are 10 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 10-WFDFN functions. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. 10 pins are present in total in this power management. This power management system has 10 pins. It is recommended that Vsup should not be less than 0V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 22μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16034, which is the base power ics number. The power management must be powered by 2.5/5V volts to function properly.
MAX16034LLB44+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current
MAX16034LLB44+T Applications
There are a lot of Maxim Integrated MAX16034LLB44+T Voltage Supervisors applications.
- Solar power charger
- Consumer electronics
- Efficient information transmission
- Microprocessor system
- Automotive power systems
- Detection of phase loss
- Precision measurement
- DVR
- Analog circuit
- Utility meter
