MAX16034PLB23+T Overview

Power management is mounted through 10 terminals. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a 10-WFDFN package. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 10 pins that are attached to IC management. 10 pins make up the power management. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C. During operation, this power management system outputs Open Drain or Open Collector. The supervisor's supply current is specified to 22μA. You can always use MAX16034, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 2.5/5V power to power this power management.

MAX16034PLB23+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current

MAX16034PLB23+T Applications

There are a lot of Maxim Integrated MAX16034PLB23+T Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Analog circuit
• Refrigeration
• Radio
• Medical-specific insulation monitor
• Power communication system
• Satellite navigation
• Detection of phase loss
• Unattended substation automation
• Important electronics for automotive safety