MAX16035PLB23+T Overview

Power management is mounted through 10 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. In this PMIC, you can find 10-WFDFN functions for your reference. This IC power shares lots of benefits with other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 10. This power management has 10 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a 22μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MAX16035. It requires 2.5/5V watts of power to operate this voltage supervisor.

MAX16035PLB23+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current

MAX16035PLB23+T Applications

There are a lot of Maxim Integrated MAX16035PLB23+T Voltage Supervisors applications.

• Fire equipment power monitoring system
• Smart meter
• Digitally controlled LDO regulators circuit
• Multi-voltage system
• Network equipment
• Power distribution systems of CCU
• Battery-powered equipment
• emergency room
• Analog circuit
• Leakage protection