MAX16039LLA29+T Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes 8-WFDFN functions for your convenience. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. In total, it has 8 pins on IC management. The pins of the power management system count 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 22μA. A similar IC managements number of the manufacturer can always be found by using MAX16039, the base power ics number. To operate this power management, you will need at least 2.5/5V volts of power.

MAX16039LLA29+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current

MAX16039LLA29+T Applications

There are a lot of Maxim Integrated MAX16039LLA29+T Voltage Supervisors applications.

• Household appliances
• Leakage protection
• Consumer electronics
• DSP
• Electronics installed in the vehicle
• Electric heating appliances
• Microprocessor system
• Unattended substation automation
• Network equipment
• Medical-specific insulation monitor