MAX16040LLA23+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 8-WFDFN functions. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 22μA volt supply current. You can always use MAX16040, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 2.5/5V volts to function properly.

MAX16040LLA23+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current

MAX16040LLA23+T Applications

There are a lot of Maxim Integrated MAX16040LLA23+T Voltage Supervisors applications.

• Consumer electronics
• Important electronics for automotive protection
• Battery-powered equipment
• Insulation fault location system
• Detection of phase loss
• External alarm
• Smartphones
• Microcontroller system
• DSP
• Automotive permanent magnet synchronous motors