MAX16040PLA29+T Overview

Power management is mounted through 8 terminals. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 8-WFDFN functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. The pins of the power management system count 8. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 22μA. A similar IC managements number of the manufacturer can always be found by using MAX16040, the base power ics number. This power management requires 2.5/5V power to work.

MAX16040PLA29+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current

MAX16040PLA29+T Applications

There are a lot of Maxim Integrated MAX16040PLA29+T Voltage Supervisors applications.

• Embedded computing
• Detection of phase sequence
• Leakage current detection
• DSP
• Dash board
• Medical-specific insulation monitor
• Power distribution systems of ICU
• Transformer load monitoring equipment
• Urban rail transit weak current power monitoring
• Linux and server computing