MAX16055FAUB+ Overview

There are 10 terminals on this power management that allow it to be mounted. Tube-packaging is used. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 6 channels that can be found. For your reference, this PMIC includes a list of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. The supervisor is always powered by a 3.3V volt supply. Power management conducts at a voltage of 6. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 10 pins that are attached to IC management. This power management has 10 pins. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~125°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 55μA. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use MAX16055, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX16055FAUB+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
55μA operating supply current

MAX16055FAUB+ Applications

There are a lot of Maxim Integrated MAX16055FAUB+ Voltage Supervisors applications.

• Network equipment
• Power distribution systems of operating room
• WiFi router
• Microprocessor system
• Smart meter
• Important electronics for automotive safety
• Digitally controlled LDO regulators circuit
• Unattended substation automation
• Rechargeable batteries
• Electronics installed in the vehicle