MAX16057ATT30+T Overview

Power management is mounted through 6 terminals. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 6-WDFN Exposed Pad functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management conducts at a voltage of 3.3V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 6 pins are located on this power management. Pin count of the power management is 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In addition, IC management are other features such as [0], to mention only a few. You can always use MAX16057, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX16057ATT30+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V

MAX16057ATT30+T Applications

There are a lot of Maxim Integrated MAX16057ATT30+T Voltage Supervisors applications.

• Rechargeable batteries
• Digitally controlled LDO regulators circuit
• Power communication system
• Military communications
• Urban rail transit weak current power monitoring
• WiFi router
• Solar power charger
• Precision measurement
• Stable power system
• Automotive permanent magnet synchronous motors