MAX16072RS24D2+T Overview

There are 4 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC power is to provide you with a reference of 4-WFBGA, CSPBGA functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. There are 4 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. To find similar IC managements from the manufacturer, you can always search by MAX16072.

MAX16072RS24D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

MAX16072RS24D2+T Applications

There are a lot of Maxim Integrated MAX16072RS24D2+T Voltage Supervisors applications.

• Fire equipment power monitoring system
• Detection of phase sequence
• Rechargeable batteries
• Battery-powered equipment
• Dash board
• Low voltage/high power - AI, GPU
• External alarm
• Network equipment
• Sensitive sensors
• emergency room