MAX16073RS17D1+T Overview

A total of 4 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to power management for 4-WFBGA, CSPBGA functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. Power managment ic pin count is 4. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16073, which is the base power ics number.

MAX16073RS17D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

MAX16073RS17D1+T Applications

There are a lot of Maxim Integrated MAX16073RS17D1+T Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Magnetic resonance imaging
• Detection of phase sequence
• Low voltage/high power - AI, GPU
• emergency room
• Urban rail transit weak current power monitoring
• Smartphones
• Electronics installed in the vehicle
• Power distribution systems of CCU
• Leakage protection