MAX16073RS22D3+T Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 4-WFBGA, CSPBGA functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. 4 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using MAX16073, the base power ics number. It is one of the well-known nanoPower series power ic line.

MAX16073RS22D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

MAX16073RS22D3+T Applications

There are a lot of Maxim Integrated MAX16073RS22D3+T Voltage Supervisors applications.

• DC stabilized power supply module
• DVR
• Data storage applications
• Low voltage/high power - AI, GPU
• Detection of phase loss
• Radar
• Unattended substation automation
• Power distribution systems of CCU
• Battery cars
• Automotive permanent magnet synchronous motors