MAX16814BEUP+T Overview

To save space on the board, it has a 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package. LED drivers have a total of 4 outputs that are used in the design of the drivers.Surface Mount is used to mount the led light driver.When it emerges as a DC DC Controller, it shows high-performance and reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Backlight, Lighting has many advantages.It operates based on the frequency of 200kHz~2MHz.For its operation, 20 terminations are designed.The base is configured with 20 pins.If the voltage supply is lower than 4.75V, undetermined failures may occur.28 segments are present.The mount is in the direction of Surface Mount.It can be found under the part number MAX16814.There are 20 pins on it.As a result, its characteristics can also be categorized as Display Drivers.The internal voltages needed to power systems is 40V.The voltage at the output terminal is 40V.

MAX16814BEUP+T Features

Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 200kHz~2MHz
Supply voltage of 12V
Operating with the supply voltage of 40V
Output voltage of 40V

MAX16814BEUP+T Applications

There are a lot of Maxim Integrated MAX16814BEUP+T LED Driver ICs applications.

• Stage Lighting and Signage
• Refrigeration lighting
• Stage and Studio lighting
• Linear fluorescent
• Flicker-free LED Lighting using R1580N
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Street lighting
• OLED power supply for portable equipment
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Amusement Machines