MAX16823AUE/V+T Overview

The board's 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space. For the design of these LED drivers, 3 outputs are used.Surface Mount is used for mounting the led light driver.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.The led light driver operates normally at -40°C~125°C TA. Automotive, Backlight, Lighting benefits significantly from the program.With a base of 16, this LED light driver is configured.Under 5.5V voltage supply, undetermined failures may occur.Part number MAX16823 represents this LED driver.The output voltage of this device is 39.3V.Supply voltage can be set to a maximum value of 40V.In this case, the load can only be supplied with 100mA current.There is 40V internal voltage required to power systems.LED drivers belonging to the series Automotive, AEC-Q100 are important components in a wide range of applications.

MAX16823AUE/V+T Features

Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Operating with the supply voltage of 40V

MAX16823AUE/V+T Applications

There are a lot of Maxim Integrated MAX16823AUE/V+T LED Driver ICs applications.

• Dimmable LED for vehicle interiors
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• High-end retail lighting
• Flicker-free LED Lighting using R1580N
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Stage and Studio lighting
• LED headlights
• Stage Lighting and Signage
• Medical surgery lighting
• Replacement lamps