MAX16831ATJ+ Overview

The board's 32-WFQFN Exposed Pad package saves space. In LED drivers, the outputs are all set to 1.The mounting method is Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Controller.It is possible for the led driver ic to operate normally at -40°C~125°C TA.Automotive, Lighting has many benefits.In the 125kHz~600kHz frequency range, it operates.It operates using 32 terminations.The base is configured with 32 pins.If the voltage supply is less than 5.5V, undetermined failures will occur.There are estimated to be 1 segments.It has been mounted on Surface Mount.LED drivers can be found under the base part number MAX16831.32 pins are used on the device.In addition, it can also be categorized into Display Drivers based on its characteristics.If the maximum supply current is less than 4.5mA, the device is capable of providing high efficiency.It is possible to supply the load with 10A current.The internal voltages needed to power systems is 76V.A 3.15V voltage is output by it.

MAX16831ATJ+ Features

Available in the 32-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 125kHz~600kHz
Supply voltage of 14V
Operating with the supply voltage of 76V
Output voltage of 3.15V

MAX16831ATJ+ Applications

There are a lot of Maxim Integrated MAX16831ATJ+ LED Driver ICs applications.

• Panel lighting
• Constant Voltage Power Source for portable equipment
• Museum lighting
• Linear fluorescent
• White LED Backlight for portable equipment
• Medical surgery lighting
• LED Lightings for Inspection Devices
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• LED headlights
• Architectural lighting