MAX16833EAUE/V+QA Overview

Its 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used to save board space. This LED driver has 1 outputs.Surface Mount is used to mount the led light driver.DC DC Controller emerges with high efficiency and reliability.If the led driver ic is set to -40°C~125°C TA, it will work normally.Automotive, Lighting has significant advantages.On the basis of the frequency 100kHz~1MHz, it operates.It is possible that failures will occur if the voltage supply is below 5V.There is a device mounted on the Surface Mount.Ideally, the supply voltage should be 65V.Optimally, it provides a voltage value of 65V for the maximum supply voltage.With 5V as the minimal input voltage, it operates.It reaches 65V when the maximum supply current is allowed.In order to ensure stable operation, the operating temperature should not exceed 125°C.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.Several applications make use of this LED driver from the Automotive, AEC-Q100 series.There are 1 transmission channels available.Frequency is its output type.

MAX16833EAUE/V+QA Features

Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~1MHz

MAX16833EAUE/V+QA Applications

There are a lot of Maxim Integrated MAX16833EAUE/V+QA LED Driver ICs applications.

• Constant Voltage Power Source for portable equipment
• Replacement lamps
• Gallery lighting
• Down lights
• White LED Backlight for portable equipment
• High-end retail lighting
• Panel lighting
• Scanners and Handy Terminals
• Sports Facility Lighting
• LED Lightings for Inspection Devices