MAX16834AUP/V+ Overview

20-TSSOP (0.173, 4.40mm Width) Exposed Pad saves board space. For the design of these LED drivers, 1 outputs are used.In this case, mounting method is Surface Mount.When it emerges as a DC DC Controller, it shows high-performance and reliability.It is possible for the led light driver to operate at a temperature of -40°C~125°C TA.There are considerable benefits for Automotive, Backlight.It operates based on the frequency of 100kHz~1MHz.In this case, the termination value is 20.This module has 20 pins as its base.Undetermined failures will occur if the voltage supply is less than 4.75V.100 segments exist.LED drivers have a base part number of MAX16834.The voltage output by it is 27V.In this device, there are 20 pins.In addition to Display Drivers, it is also classified by its characteristics.As long as the supply current is less than 10mA, this device can provide high efficiency.In order for systems to function, a voltage of 0 is required internally.There are many applications for this LED driver belonging to the Automotive, AEC-Q100 series.

MAX16834AUP/V+ Features

Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~1MHz
Supply voltage of 12V
Operating with the supply voltage of 28V

MAX16834AUP/V+ Applications

There are a lot of Maxim Integrated MAX16834AUP/V+ LED Driver ICs applications.

• High-end retail lighting
• LED headlights
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• LED backlight driver for LCD displays for Tablets and Note PCs
• Constant Voltage Power Source for portable equipment
• Panel lighting
• Dimmable LED for vehicle interiors
• LED Lightings for Industrial Equipment
• General lighting
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices