MAX16840ATB+TQR Overview

There is a 10-WFDFN Exposed Pad package on the board that is used to save space. There are 1 outputs used for the design of this LED drivers.For mounting, it uses the Surface Mount method.This emerges as a AC DC Offline Switcher with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -40°C~125°C TA.Based on the frequency of 300kHz, it operates on the basis of a pulse.It has a base configuration of 10 pins.Under 6.5V voltage supply, undetermined failures may occur.Surface Mount is mounted in the way.It is acceptable to operate with a supply voltage of 48V.This model is designed to offer 48V as its maximum supply voltage.A minimal input voltage of 6.5V is required for it to operate.It is possible to supply current up to 48V.In order to ensure stable operation, the operating temperature should not exceed 125°C.In order to maintain stable operation, a temperature greater than -40°C is essential.The electronic component can fully perform its functions if the switching frequency is maintained at 300kHz.Transmission is available on 1 channels.The output type of the device is Frequency.

MAX16840ATB+TQR Features

Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 300kHz
Switching frequency of 300kHz

MAX16840ATB+TQR Applications

There are a lot of Maxim Integrated MAX16840ATB+TQR LED Driver ICs applications.

• Amusement Machines
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• High-end retail lighting
• Linear fluorescent
• Scanners and Handy Terminals
• Power source for accessories such as car audios, car navigation systems, and ETC systems
• Stage Lighting and Signage
• Refrigeration lighting
• Auxiliary lights for on-vehicle cameras
• Portable lighting