MAX17499AEUB+ Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 9.5V~24V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. It can switch at 50kHz~2.5MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Featured in the dcdc regulator is Enable which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 10. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Other relevant dc to dc converter ics can be found by searching "MAX17499". 9.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, the DC regulator outputs 800mV voltage. normally, the dc dc regulator's output current is 100nA, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. There is a maximum frequency of 625kHz on this dc regulators. A circuit should contain 24V in order to ensure the voltage regulator dc to dc runs safely and reliably. The supply current of the voltage controller is 2mA.

MAX17499AEUB+ Features

Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %

MAX17499AEUB+ Applications

There are a lot of Maxim Integrated MAX17499AEUB+ DC to DC converter applications.

• Printing equipment
• Scientific testing
• Smoke exhaust equipment
• Power supplies of electronic gadgets
• Current source circuits
• Handheld GPS
• Surface processing equipment
• Special machining machine tools
• Shearing machines
• Computer monitoring equipment of building