MAX17500BAUB+ Overview

It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 23.6V~30V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~125°C TJ dc switcher. The switching controller can be switched at 50kHz~2.5MHz. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 10. You can find other relevant dc to dc converter ics by searching "MAX17500". There are only 10 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Test statistics indicate DC regulator outputs 1.5V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 50μA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 75 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 625kHz is the frequency of the switching controller. 12V is the nominal working voltage. A supply current of 50μA is used to power it.

MAX17500BAUB+ Features

Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Enable
Max Duty Cycle: 75 %
Frequency: 625kHz

MAX17500BAUB+ Applications

There are a lot of Maxim Integrated MAX17500BAUB+ DC to DC converter applications.

• ATMs
• Thermal power
• Wide-range voltage regulation circuits
• Experimental setup
• Computer monitoring equipment of building
• Industrial controllers
• Ball screw pair
• Emergency lighting monitoring equipment
• Flaw detection equipment
• Adjustable voltage or current linear circuits