MAX19517ETM+ Overview

The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 48-WFQFN Exposed Pad package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 2 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 130M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.7V~1.9V 2.3V~3.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX19517 family.Analog, Digital is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 1.7V~3.5V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 3.5V.It operates with the minimal supply voltage of 1.7V.This electrical digital converter operates from a supply voltage of 3.3V.The maximal analog input voltage of this electrical AD converter is 1.5V.The ADC converter operates from 1.8V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 3.2W.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 130 Msps.Simultaneous Sampling can be ensured when operating.

MAX19517ETM+ Features

1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 1.7V
1.8V power supplies

MAX19517ETM+ Applications

There are a lot of Maxim Integrated MAX19517ETM+ ADC applications.

• Handheld Terminal Interface
• Digital Multimeters, PLC's (Programming Logic Controllers)
• Broadband data applications
• Telecommunications
• Spectrum Analysis
• Cell Phones
• Music recording
• AC motor control
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Communication Systems