MAX1954AEUB+T Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). A 3V~13.2V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 300kHz . dc dc regulator is made easier with Surface Mount. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. 10 terminations with a variety of function. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Other relevant dc to dc converter ics can be found by searching "MAX1954". There are only 10 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 3V is the minimum required for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 4.95V. The dc to dc regulator can only accept a maximum input voltage of 5.5V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. The duty cycle of the voltage regulator dc to dc can be set to 93 % on power-up or power-down to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 360kHz on this dc regulators.

MAX1954AEUB+T Features

Transistor Driver Outputs
Switching Frequency: 300kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %

MAX1954AEUB+T Applications

There are a lot of Maxim Integrated MAX1954AEUB+T DC to DC converter applications.

• Servo drive system
• Large fire protection systems
• Bending machines
• Smoke exhaust equipment
• Pipe bending machines
• Access control systems
• Boring machines
• Various precision measuring instruments
• Experimental setup
• Printing