5V 24 Pin MAX208 Receivers4/4 Drivers/ReceiversMin 4.5V VMax 5.5V V
SOT-23
MAX208CAG+ Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
24-SSOP (0.209, 5.30mm Width)
Number of Pins
24
Supplier Device Package
24-SSOP
Weight
220.105698mg
Operating Temperature
0°C~70°C
Packaging
Tube
Published
2010
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Type
Transceiver
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Voltage - Supply
4.5V~5.5V
Base Part Number
MAX208
Operating Supply Voltage
5V
Interface
RS-232
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Operating Supply Current
20mA
Nominal Supply Current
11mA
Propagation Delay
10 μs
Logic Function
Receiver, Transceiver
Data Rate
120Kbps
Protocol
RS232
Number of Drivers/Receivers
4/4
Duplex
Full
Receiver Hysteresis
500mV
Number of Drivers
4
Number of Transceivers
1
Number of Receivers
4
Number of Transmitters
4
Height
1.78mm
Length
8.33mm
Width
5.38mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$8.149093
$8.149093
10
$7.687824
$76.87824
100
$7.252664
$725.2664
500
$6.842136
$3421.068
1000
$6.454845
$6454.845
MAX208CAG+ Product Details
MAX208CAG+ Overview
This LED driver IC features an enhanced 24-SSOP (0.209, 5.30mm Width) package for driving common LEDs.In the Tube package, this receiver is mounted.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.You can place this wide receiver to any Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.Up to 4/4 receivers/drivers can be installed simultaneously on this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.This part number MAX208 can be used to search for more variants based on the product type, temperature, package, etc.24-pin driver IC with improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is a 5V input voltage supply that can be used to operate this transceiver module.The module isolated transceiver implements a total of 1 transceivers.In module isolated transceiver are 4 receivers.On the integrator circuit, there are 4 drivers embedded.A transceiver module's temperature less than 70°C must be used for operation.It is important that this optical transceiver does not operate at 0°C degrees Celsius at its minimum operating temperature.An input voltage of 20mA is recommended for this integrating circuit to be able to drive LEDs.A transceiver's maximum supply voltage of 5.5V is rated for this IC and it is a dual channel IC.In total, 4 transmitters have been installed, which produce radio waves and transmit data by using antennas to send data.This line driver ic requires a minimum supply voltage of 4.5V to function properly.There is a 24-SSOP supplier package included with wide receiver.
MAX208CAG+ Features
Tube package 24 pins
MAX208CAG+ Applications
There are a lot of Maxim Integrated MAX208CAG+ Drivers/Receivers/Transceivers applications.