ISOLATED DATA INTERFACE-PAIRED WITH MAX251; TTL/CMOS LOGIC TO OPTO INTERFACE
HTS Code
8542.39.00.01
Subcategory
Line Driver or Receivers
Technology
CMOS
Voltage - Supply
4.5V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
2.54mm
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
MAX250
Pin Count
14
Qualification Status
Not Qualified
Power Supplies
5V
Supply Current-Max
0.5mA
Data Rate
116 kbps
Output Characteristics
3-STATE
Differential Output
NO
Output Polarity
TRUE
Protocol
RS232
Input Characteristics
SCHMITT TRIGGER
Number of Drivers/Receivers
2/2
Driver Number of Bits
2
Receiver Number of Bits
2
Duplex
Full
Receiver Hysteresis
600mV
Interface Standard
EIA-232
Output Low Current-Max
0.0032A
Out Swing-Min
1.4 V
Height Seated (Max)
5.72mm
Width
7.62mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$8.22000
$8.22
10
$7.55200
$75.52
25
$7.23920
$180.98
100
$7.22400
$722.4
MAX250CPD+ Product Details
MAX250CPD+ Overview
This driver chip is excellent for driving common LEDs due to its enhanced 14-DIP (0.300, 7.62mm) package.This receiver is mounted in the Tube package.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.You can place this wide receiver to any Through Hole-type PCB or development board.A power supply of 4.5V~5.5V is used by this differential driver.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.In order to drive and receive signals from data, this wide receiver has 14 terminations integrated.This transceiver is packaged with 14 market standard pinoutsFor more variants of this part, try searching with the base part number MAX250, which indicates the product type, temperature, package, etc.This is a 14-pin driver IC with enhanced power dissipation control.In this ic receiver, the resolution was able to be set to a maximum of 2 bits.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.A ISOLATED DATA INTERFACE-PAIRED WITH MAX251; TTL/CMOS LOGIC TO OPTO INTERFACE function is also included on this optical transceiver module, which improves the overall signal management accuracy and stability.The VCC pin of the ic receiver should receive enough but not more than 0.5mA of input current.
MAX250CPD+ Features
Tube package 14 pin count 14 pins 5V power supply
MAX250CPD+ Applications
There are a lot of Maxim Integrated MAX250CPD+ Drivers/Receivers/Transceivers applications.