ISOLATED DATA INTERFACE-PAIRED WITH MAX250; RS-232 TO OPTO INTERFACE; TRISTATABLE RECEIVERS
HTS Code
8542.39.00.01
Subcategory
Line Driver or Receivers
Technology
CMOS
Voltage - Supply
4.5V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
10V
Terminal Pitch
2.54mm
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
MAX251
Pin Count
14
Qualification Status
Not Qualified
Power Supplies
+-10V
Supply Current-Max
2.5mA
Data Rate
116 kbps
Output Characteristics
TOTEM-POLE
Differential Output
NO
Output Polarity
TRUE
Protocol
RS232
Input Characteristics
SCHMITT TRIGGER
Number of Drivers/Receivers
2/2
Driver Number of Bits
2
Receiver Number of Bits
2
Duplex
Full
Receiver Hysteresis
600mV
Interface Standard
EIA-232-C; V.28
Negative Supply Voltage-Nom
-10V
Output Low Current-Max
0.0032A
Out Swing-Min
10 V
Height Seated (Max)
5.72mm
Width
7.62mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$8.22000
$8.22
10
$7.55200
$75.52
25
$7.23920
$180.98
100
$7.22400
$722.4
MAX251CPD+ Product Details
MAX251CPD+ Overview
LED drivers with the enhanced 14-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.The receiver is packaged in a Tube package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.The wide receiver can be mounted on any Through Hole-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.With a supply voltage range of 10V, this line driver ic operates efficiently.Integrated into this wide receiver are 14 terminations that are used for driving and receiving signals from data.It is packaged with 14 pinouts that are market standard for this particular transceiver.With the part number MAX251 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation control driver IC featuring 14 pins.There is a capability of 2-bit resolution with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs such as this one are designed to operate from +-10V power sources.Additionally, the optical transceiver module's ISOLATED DATA INTERFACE-PAIRED WITH MAX250; RS-232 TO OPTO INTERFACE; TRISTATABLE RECEIVERS function provides improved signal management accuracy and stability.The VCC pin of the ic receiver should receive enough but not more than 2.5mA of input current.You should keep the temperature of the line driver ic above -10V during operation.
MAX251CPD+ Features
Tube package 14 pin count 14 pins +-10V power supply
MAX251CPD+ Applications
There are a lot of Maxim Integrated MAX251CPD+ Drivers/Receivers/Transceivers applications.