MAX268AENG Overview

Packaged in a 24-DIP (0.300, 7.62mm) package, it is easy to install.Packaged in a Tube format, it is a very good product.In the case of this gadget, the mounting type is Through Hole.The filter type for this part is Band Pass.With a power source of 4.74V~12.6V ±2.37V~6.3V, it should work.24-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the MAX268.In terms of frequency, it is at a cutoff or center frequency of 140kHz.As the reflow temperature reaches 240, it reaches its peak.During all periods of operation, 5V is used as a source of power for the component.At 6.3V, the maximum supply voltage (Vsup) is reached and the circuit is completed.As soon as you start the machine, it should be warmer than -40°C.In the current state of affairs, 85°C represents the maximum working temperature.Filter is important to remember that 24 is the pin number of the component.As you can see from the picture, there are a number of 24 terminals on the device.In 2 circuits, there are various types of circuits.This is one of a number of Through Hole mount packages that are included with the package.As far as the part type is concerned, it is of the Active type.

MAX268AENG Features

Supply voltage of 5V
Maximum operating temperature of 85°C
2 circuits
Mount of Through Hole

MAX268AENG Applications

There are a lot of Maxim Integrated
MAX268AENG active filters applications.

• Sample Rate Converters
• Digital Down Conversion
• D/A and A/D pre/post Filtering
• Tuning Bandwidth Expansion for HSP45116 and HSP45106
• Quadrature, Complex Flterlng
• Image Processing
• Polyphase Flterng
• Adaptive Fllterlng
• Very Narrow Band Fllters
• Zoom Spectral Analysis