MAX280CPA Overview

As far as packaging is concerned, it comes in a 8-DIP (0.300, 7.62mm) package.There is a Tube package that comes with it.I would like to point out that the gadget has a Through Hole mounting type.In this case, the part's filter type is Butterworth, Low Pass Switched Capacitor.I believe it should be able to work with a power source of 4.75V~16V ±2.375V~8V, if it works at all.8-pins are used in total on this board.MAX280 is the best component of the device, because it is the most important part of the device.There is either a cutoff or a center frequency in the device when it is operating at 20kHz frequency.As the peak reflow temperature reaches 260, the reflow process begins.There is always a source of 5V being used to power the component at all times.Filter is important to note that 1 refers to the filter figure.There is a maximum voltage (Vsup) that is reached at location 8V, which is the supply voltage.There are +-5V supplies in the device.Currently, 70°C is the highest working temperature that can be achieved.Filter is necessary to have a supply voltage, Vsup, which is greater than 2.375V.In addition to these features, there are also some others such as ZERO DC ERROR.

MAX280CPA Features

Supply voltage of 5V

MAX280CPA Applications

There are a lot of Maxim Integrated
MAX280CPA active filters applications.

• Echo Cancellation
• Complex Multiply-Add
• Sample Rate Converters
• Digital Down Conversion
• D/A and A/D pre/post Filtering
• Tuning Bandwidth Expansion for HSP45116 and HSP45106
• Quadrature, Complex Flterlng
• Image Processing
• Polyphase Flterng
• Adaptive Fllterlng