MAX293CWE+T Overview

Packaged in a 16-SOIC (0.295, 7.50mm Width) package, it is easy to install.Packaged in a Tape & Reel (TR) format, it is a very good product.In the case of this gadget, the mounting type is Surface Mount.The filter type for this part is Elliptic, Low Pass Switched Capacitor.With a power source of 4.75V~11V ±2.375V~5.5V, it should work.16-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the MAX293.In terms of frequency, it is at a cutoff or center frequency of 25kHz.As the reflow temperature reaches 260, it reaches its peak.During all periods of operation, 5V is used as a source of power for the component.At 5.5V, the maximum supply voltage (Vsup) is reached and the circuit is completed.As soon as you start the machine, it should be warmer than 0°C.In the current state of affairs, 70°C represents the maximum working temperature.Filter is important to remember that 16 is the pin number of the component.A device with 5/+-5V supplies is being used.As you can see from the picture, there are a number of 16 terminals on the device.A greater voltage must be supplied, Vsup, than the voltage consumed, 2.375V.In 1 circuits, there are various types of circuits.Depending on the model, the maximum supply temperature can be raised to 22mA.

MAX293CWE+T Features

Supply voltage of 5V
Maximum operating temperature of 70°C
1 circuits

MAX293CWE+T Applications

There are a lot of Maxim Integrated
MAX293CWE+T active filters applications.

• Sample Rate Converters
• Digital Down Conversion
• D/A and A/D pre/post Filtering
• Tuning Bandwidth Expansion for HSP45116 and HSP45106
• Quadrature, Complex Flterlng
• Image Processing
• Polyphase Flterng
• Adaptive Fllterlng
• Very Narrow Band Fllters
• Zoom Spectral Analysis