MAX306EUI+ Overview

Due to its 28-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 16:1. The operating temperature is extended to around -40°C~85°C TA. There are 28 terminations totally. A electrical component with 16 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. A key feature of the 28 series is the inclusion of this electronic part as part of its design. A total of 1 circuits make up this switch device. Look for analog switch ic variants by searching with MAX306. Analog switches have 175Ohm internal resistance. To find out what the functions of 28 pins are, please refer to their datasheets. Multiplexers should not be powered above 30V in normal situations. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 5V. It would be sufficient to run this analogue multiplexer with 500μA current. Despite this switch device's dual supply capability, its voltage should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. The electrical part can be operated at 28V voltage levels.

MAX306EUI+ Features

16 Channels
500μA Supply Current

MAX306EUI+ Applications

There are a lot of Maxim Integrated MAX306EUI+ Analog Switches & Multiplexers ICs applications.

• Video signal routing
• Channelized and Unchannelized DS3 applications
• CSU
• Voice over IP/DSL – Integrated Access Devices, Smart
• Channel Banks
• Ultrasound
• Cable PC
• SONET/SDH ADM
• Video switching
• Sample hold systems