Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX3082CPA+

MAX3082CPA+

MAX3082CPA+

Maxim Integrated

8 Terminations5V 8 Pin MAX3082 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

MAX3082CPA+ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Contact Plating Tin
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2004
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Subcategory Line Driver or Receivers
Max Power Dissipation 727mW
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number MAX3082
Pin Count 8
Max Output Current 250mA
Operating Supply Voltage 5V
Power Supplies 5V
Interface RS-422, RS-485
Nominal Supply Current 600μA
Quiescent Current 375μA
Data Rate 115Kbps
Differential Output YES
Output Polarity COMPLEMENTARY
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 1
Duplex Half
Receiver Hysteresis 100mV
Number of Transceivers 1
ESD Protection No
Receive Delay-Max 200 ns
Simplex/Duplex Half Duplex
Transmit Delay-Max 2600 ns
Out Swing-Min 2 V
Height 4.45mm
Length 9.91mm
Width 7.87mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $2.70000 $2.7
10 $2.42200 $24.22
50 $2.28940 $114.47
100 $2.22000 $222
MAX3082CPA+ Product Details

MAX3082CPA+ Overview


Driver ICs with enhanced 8-DIP (0.300, 7.62mm) packages are excellent for driving LEDs with common characteristics.In the Tube package, this receiver is mounted.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.Power supply requirements for this differential driver are 4.75V~5.25V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.5V is the supply voltage range that this line driver ic can efficiently operate with.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number MAX3082 describes the product type, temperature, package, etc., you might get more options by searching with it.8-pin driver chip with enhanced power dissipation.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.Transceivers implemented by this IC total 1 in total.

MAX3082CPA+ Features


Tube package
8 pin count
8 pins
5V power supply

MAX3082CPA+ Applications


There are a lot of Maxim Integrated MAX3082CPA+ Drivers/Receivers/Transceivers applications.

  • Mainframes, workstations or storage devices
  • AV receiver
  • Military satellite communications
  • Precision engineering measurement
  • 1x/2x Fiber Channel
  • WDM transmission
  • Datacom networking applications
  • Vehicle
  • Desktop PC
  • TV signal transmission

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News