MAX309EUE+ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. The total number of terminations is 16. A high-quality output is provided by the electrical component's 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is part of the design of the 16 series that this electronic component is included. Multiplexers built on a SP4T switching circuit are built. There are 2 circuits in this switch device. Look for analog switch ic variants by searching with MAX309. A 175Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. Users shouldn't supply more than 30V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 5V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 500μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. A dual power supply should have at least 5V voltage attached. 28V operating voltages are supported by the electronic component.

MAX309EUE+ Features

4 Channels
Switch Circuit: SP4T
500μA Supply Current

MAX309EUE+ Applications

There are a lot of Maxim Integrated MAX309EUE+ Analog Switches & Multiplexers ICs applications.

• RGB switches
• PDAs
• Low-Voltage
• SDH
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• T1/E1 Terminals
• Relay replacements
• Automotive applications
• Remote Powered Equipment
• Audio/video switches