225ns, 185ns SPST - NO 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX313 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
MAX313LCSE+ Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Operating Temperature
0°C~70°C TA
Packaging
Tube
Published
2009
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
10Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
842mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
MAX313
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
20V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
36V
Min Supply Voltage
4.5V
Nominal Supply Current
100pA
Max Supply Current
100pA
Throw Configuration
SPST
Turn On Delay Time
225 ns
Voltage - Supply, Single/Dual (±)
4.5V~36V ±4.5V~20V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
185 ns
Max Dual Supply Voltage
20V
On-State Resistance (Max)
10Ohm
Min Dual Supply Voltage
4.5V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
75 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
15pF 15pF
On-state Resistance Match-Nom
0.3Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
225ns, 185ns
Charge Injection
20pC
Channel-to-Channel Matching (ΔRon)
300m Ω
Crosstalk
-85dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Height
1.5mm
Length
10mm
Width
4mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$6.894694
$6.894694
10
$6.504428
$65.04428
100
$6.136253
$613.6253
500
$5.788918
$2894.459
1000
$5.461243
$5461.243
MAX313LCSE+ Product Details
MAX313LCSE+ Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around 0°C~70°C TA. The total number of terminations is 16. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. The analog switch ics are built using SPST - NO switching circuits. There are 4 circuits in this switch device. Try searching with MAX313 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 4.5V. A digital multiplexer may suffer damage if voltage is applied above 100pA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating voltages range from 20V.
MAX313LCSE+ Features
1 Channels Switch Circuit: SPST - NO
MAX313LCSE+ Applications
There are a lot of Maxim Integrated MAX313LCSE+ Analog Switches & Multiplexers ICs applications.
Channel Banks
Digital Cross-Connects
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads