LED drivers benefit from this IC's enhanced 20-SSOP (0.209, 5.30mm Width) package.The Tube package houses this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A differential driver like this uses 3V~5.5V of power.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.An operating voltage range of 3.3V is suitable for this line driver ic.In this wide receiver, 20 terminations are integrated for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.For more variants of this part, try searching with the base part number MAX3160, which indicates the product type, temperature, package, etc.It is a 20-pin driver IC with enhanced power dissipation controls.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.Typically, the resolution of this receiver is specified to be 1 bits.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.IC3.3/5V is a high performance driver IC designed to work with a 3.3/5V power supply.Transceivers implemented by this IC total 1 in total.On the integrator circuit are embedded 2 drivers.The VCC pin of the ic receiver should receive enough but not more than 5.5mA of input current.It is capable of driving LEDs with a voltage of 6mA as the input voltage to this integrating circuit.A voltage of 13.2V can be delivered by Wide receiver.
MAX3160ECAP+ Features
Tube package 20 pin count 20 pins 3.3/5V power supply
MAX3160ECAP+ Applications
There are a lot of Maxim Integrated MAX3160ECAP+ Drivers/Receivers/Transceivers applications.