Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX3161ECAG+

MAX3161ECAG+

MAX3161ECAG+

Maxim Integrated

24 Terminations24 Pin MAX3161 Receivers2/2 Drivers/Receivers1 Functions

SOT-23

MAX3161ECAG+ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SSOP (0.209, 5.30mm Width)
Number of Pins 24
Weight 220.105698mg
Operating Temperature 0°C~70°C
Packaging Tube
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Type Transceiver
Terminal Finish Matte Tin (Sn)
Subcategory Line Driver or Receivers
Technology CMOS
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number MAX3161
Pin Count 24
Power Supplies 3.3/5V
Interface RS-232, RS-422, RS-485
Operating Supply Current 2.8mA
Supply Current-Max 6mA
Data Rate 10Mbps
Differential Output YES
Protocol RS232, RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 2/2
Receiver Number of Bits 1
Duplex Full
Receiver Hysteresis 500mV
Number of Drivers 2
Number of Transceivers 1
Simplex/Duplex Full Duplex
Transmit Delay-Max 800 ns
Height 1.78mm
Length 8.33mm
Width 5.38mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $17.072000 $17.072
10 $16.105660 $161.0566
100 $15.194019 $1519.4019
500 $14.333980 $7166.99
1000 $13.522623 $13522.623
MAX3161ECAG+ Product Details

MAX3161ECAG+ Overview


Designed for common LEDs, this driver IC features an enhanced 24-SSOP (0.209, 5.30mm Width) package.This receiver is mounted in the Tube package.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, you can install this wide receiver.In terms of power supply, this differential driver utilizes 3V~5.5V.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.With a supply voltage range of 3.3V, this line driver ic operates efficiently.This wide receiver has 24 terminations for driving and receiving data signals.ICs that are packaged with market standard pinouts are available on the market.Since the base part number MAX3161 describes the product type, temperature, package, etc., you might get more options by searching with it.24-pin driver chip with enhanced power dissipation.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.There is usually a 1-bit resolution specified for this receiver when it is used.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.This driver IC is designed to operate from a 3.3/5V power supply.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.2 drivers are embedded on the integrator circuit.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 6mA.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 2.8mA.

MAX3161ECAG+ Features


Tube package
24 pin count
24 pins
3.3/5V power supply

MAX3161ECAG+ Applications


There are a lot of Maxim Integrated MAX3161ECAG+ Drivers/Receivers/Transceivers applications.

  • Wireless teaching
  • Wireless communication
  • Thermal management
  • Sensor reporting
  • Wireless transmission
  • Low power, low voltage systems
  • Notebook
  • Military satellite communications
  • Telecom applications
  • transmission relay

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News