MAX319ESA+ Overview

Packed in 8-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. Totally, there are 8 terminations. The electronic part provides high-quality output because it has 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 8 pins. The analog switch ics are built using SPDT switching circuits. Search with MAX319 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 35Ohm. You can find the functions of the 8 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. An effective Dual, Single supply digital multiplexer. A low voltage of 10V should be applied to the electronic component. This multiplexer would work with 1μA current. A voltage higher than 100pA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. When using dual power supplies, you should attach at least 4.5V. Operating voltages range from 20V. There is 35Ohm resistance between Drain and Source for this electronic part.

MAX319ESA+ Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
Drain-to-Source resistance: 35Ohm

MAX319ESA+ Applications

There are a lot of Maxim Integrated MAX319ESA+ Analog Switches & Multiplexers ICs applications.

• Wireless Local Loop
• Precision data acquisition
• PDH Multiplexers
• PBX interfaces
• Mechanical reed relay replacement
• Multiplexers
• CSU
• SDH
• Private Branch Exchange (PBX)
• Data Acquisition Systems