ADDITIONAL OUTPUT FOR 1 RECEIVER; TRISTATABLE RECEIVERS; AUTO SHUTDOWN
HTS Code
8542.39.00.01
Subcategory
Line Driver or Receivers
Technology
CMOS
Voltage - Supply
2.7V~3.6V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
MAX3212
Pin Count
28
JESD-30 Code
R-PDSO-G28
Qualification Status
Not Qualified
Power Supplies
3/3.3V
Supply Current-Max
3mA
Data Rate
235Kbps
Output Characteristics
3-STATE
Differential Output
NO
Output Polarity
INVERTED
Protocol
RS232
Input Characteristics
SCHMITT TRIGGER
Number of Drivers/Receivers
3/5
Driver Number of Bits
3
Receiver Number of Bits
5
Duplex
Full
Receiver Hysteresis
700mV
Interface Standard
EIA-232-E; V.24; V.28; EIA-562
Receive Delay-Max
2000 ns
Transmit Delay-Max
2000 ns
Output Low Current-Max
0.001A
Out Swing-Min
5 V
High Level Input Current-Max
0.000001A
Height Seated (Max)
1.99mm
Length
10.2mm
Width
5.29mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
MAX3212EAI+T Product Details
MAX3212EAI+T Overview
LED drivers benefit from this IC's enhanced 28-SSOP (0.209, 5.30mm Width) package.In this package, the receiver is mounted in the Tape & Reel (TR) format.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 2.7V~3.6V power supply.It is possible to have up to 3/5 receivers/drivers in use simultaneously with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.This line driver ic can operate efficiently with a supply voltage range of 3.3V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number MAX3212 describes the product type, temperature, package, etc., you might get more options by searching with it.There is a capability of 3-bit resolution with this ic receiver.This receiver is typically specified with a resolution of 5 bits. In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.IC3/3.3V is a high performance driver IC designed to work with a 3/3.3V power supply.A ADDITIONAL OUTPUT FOR 1 RECEIVER; TRISTATABLE RECEIVERS; AUTO SHUTDOWN function is also included in this optical transceiver module, which improves stability and accuracy of signal management.To power the ic receiver, sufficient current but not more than 3mA should be supplied to its VCC pin.