EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS; AUTO SHUTDOWN
Subcategory
Line Driver or Receivers
Technology
CMOS
Voltage - Supply
1.8V~4.25V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
MAX3218
Pin Count
20
Operating Supply Voltage
3V
Interface
RS-232
Operating Supply Current
3mA
Propagation Delay
2.7 μs
Logic Function
Receiver, Transceiver
Data Rate
120Kbps
Output Characteristics
3-STATE
Differential Output
NO
Output Polarity
INVERTED
Protocol
RS232
Input Characteristics
SCHMITT TRIGGER
Number of Drivers/Receivers
2/2
Receiver Number of Bits
2
Duplex
Full
Receiver Hysteresis
700mV
Number of Drivers
2
Number of Transceivers
1
Out Swing-Min
5 V
Height
1.78mm
Length
7.33mm
Width
5.38mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$3.88000
$3.88
10
$3.50800
$35.08
66
$3.34455
$220.7403
132
$3.01197
$397.58004
MAX3218CAP+ Product Details
MAX3218CAP+ Overview
Driver ICs with enhanced 20-SSOP (0.209, 5.30mm Width) packages are excellent for driving LEDs with common characteristics.There is a Tube package for this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, you can install this wide receiver.Power supply for this differential driver is 1.8V~4.25V.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.Wide receiver can operate within the range of 3.3V supply voltages efficiently.In this wide receiver, 20 terminations are integrated for driving and receiving signals from data.There are 20 pinouts available on this transceiver which are market standard.Since the base part number MAX3218 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.20-pin driver IC with improved power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There are typically 2 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 3V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There are 1 transceivers in total implemented by this IC.2 drivers are embedded on the integrator circuit.ICs with EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS; AUTO SHUTDOWN functions also improve the overall stability and accuracy of signal management.It has the ability to drive LEDs with an input voltage of up to about 3mA with the help of this integrating circuit.
MAX3218CAP+ Features
Tube package 20 pin count 20 pins
MAX3218CAP+ Applications
There are a lot of Maxim Integrated MAX3218CAP+ Drivers/Receivers/Transceivers applications.