This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 8. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 8 pins are injected into the body of the electronic part. A SPST - NO/NC switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. MAX322 can be used to search for analog multiplexer variants. This digital multiplexer has 35Ohm internal resistance. The functions of 8 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 8V. The analog switch ic is of the Dual supply type and is cost-effective. 2.7V should be the lowest voltage fed to the electronic component. 1μA current would be enough for this multiplexer to operate. The switch multiplexer may be damaged if it is exposed to voltage greater than 125μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. You should attach at least 2.7V voltage if you are using dual power supply. There are SEPARATE OUTPUT outputs on this analog switch ic.
MAX322CUA+ Features
1 Channels Switch Circuit: SPST - NO/NC 1μA Supply Current
MAX322CUA+ Applications
There are a lot of Maxim Integrated MAX322CUA+ Analog Switches & Multiplexers ICs applications.
Relay replacements
Microprocessor controlled systems
Industrial and process control systems
High speed data transmission line cards
PCMCIA cards
USB 1.1 signal switching circuits
Relay Replacement
SDH
Voice over IP/DSL – Integrated Access Devices, Smart