Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX3301EETJ+

MAX3301EETJ+

MAX3301EETJ+

Maxim Integrated

32 Pin MAX3301 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

MAX3301EETJ+ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 32-WFQFN Exposed Pad
Number of Pins 32
Operating Temperature -40°C~85°C
Packaging Tube
Published 2008
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
ECCN Code EAR99
Type Transceiver
Terminal Finish Matte Tin (Sn)
Subcategory Line Driver or Receivers
Technology BICMOS
Voltage - Supply 3V~4.5V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.7V
Terminal Pitch 0.5mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number MAX3301
Pin Count 32
Operating Supply Current 5μA
Max Supply Current 2mA
Data Rate 1.5Mbps
Differential Output YES
Protocol USB 2.0
Input Characteristics DIFFERENTIAL
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 3
Duplex Full
Interface Standard GENERAL PURPOSE
Receive Delay-Max 30 ns
Transmit Delay-Max 25 ns
USB USB 2.0
Out Swing-Min 2.8 V
Number of Transmitters 1
Height Seated (Max) 0.8mm
Length 5mm
Width 5mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $6.17000 $6.17
10 $5.54500 $55.45
60 $5.24250 $314.55
120 $4.54350 $545.22
300 $4.31050 $1293.15
540 $3.86780 $2088.612
1,020 $3.26200 $3.262
2,520 $3.09890 $6.1978
MAX3301EETJ+ Product Details

MAX3301EETJ+ Overview


This LED driver IC features an enhanced 32-WFQFN Exposed Pad package for driving common LEDs.The Tube package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 3V~4.5V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.An operating voltage range of 3.7V is suitable for this line driver ic.A package consisting of 32 market standard pinouts is provided with this integrated circuit.Since the base part number MAX3301 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.Wide receiver with enhanced power dissipation control, 32-pin.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.It provided a 1-bit resolution capability with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 3 bits.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 5μA.An antenna transmits or sends data through 1 transmitters, which are can transceivers used to transmit radio waves to send data.When the input current reaches or exceeds 2mA, this can transceiver could have mal-functions.

MAX3301EETJ+ Features


Tube package
32 pin count
32 pins

MAX3301EETJ+ Applications


There are a lot of Maxim Integrated MAX3301EETJ+ Drivers/Receivers/Transceivers applications.

  • Vehicle
  • Wireless smart house
  • VoIP phones
  • Metro access rings
  • Point-to-point networking
  • Cordless telephone
  • Fast Ethernet
  • Satellite communications networks
  • Mainframes, workstations or storage devices
  • Military satellite communications

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News