MAX3440EAPA+ Overview

LED drivers with the enhanced 8-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.The wide receiver can be mounted on any Through Hole-type PCB or development board.This differential driver consumes 4.75V~5.25V for its power supplyAs many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.Driver ICs with a supply voltage range of 5V can operate efficiently.8 terminations are integrated into this wide receiver for driving and receiving signals from data.This transceiver is packaged with 8 market standard pinoutsMAX3440 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There is usually a 1-bit resolution specified for this receiver when it is used.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There should be enough current supplied to the VCC pin of the part, but not more than 30mA.

MAX3440EAPA+ Features

Tube package
8 pin count
5V power supply

MAX3440EAPA+ Applications

There are a lot of Maxim Integrated MAX3440EAPA+ Drivers/Receivers/Transceivers applications.

• Gigabit Ethernet
• Wireless communication
• SONET/SDH Network
• Fiber optic cable connection network
• IP cameras
• Sensor reporting
• Bar, KTV wireless entertainment
• Routers
• Ethernet circuitry
• Desktop radio