MAX3467ESA+ Overview

This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.The Tube package contains this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.The wide receiver can be mounted on any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 4.75V~5.25V.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.As the base part number MAX3467 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 8-pin driver IC with enhanced power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.Typically, the resolution of this receiver is specified to be 1 bits.There is a voltage supply of 5V required in order for this transceiver module to be operated.Line Driver or Receivers is a subcategory of this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are 1 transceivers implemented in this module isolated transceiver.The VCC pin of the ic receiver should receive enough but not more than 4mA of input current.Using a 2.5mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.In addWide receiverion to delivering voltage at 3V, Wide receiver also has the abilWide receivery to measure voltage.In this bluetooth transceiver, the output current is rated at 125μA.

MAX3467ESA+ Features

Tube package
8 pin count
8 pins
5V power supply

MAX3467ESA+ Applications

There are a lot of Maxim Integrated MAX3467ESA+ Drivers/Receivers/Transceivers applications.

• Televisions
• interconnection between switches
• Car radio
• Pocket PC
• Gigabit Ethernet
• Ethernet circuitry
• Cordless telephone
• LAN, SAN, WAN (local, storage, work area networks)
• Shortwave receiver
• Laser diode bonding