Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX352CPE+

MAX352CPE+

MAX352CPE+

Maxim Integrated

175ns, 145ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX352 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)

SOT-23

MAX352CPE+ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 10 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2002
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 35Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 842mW
Technology CMOS
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Base Part Number MAX352
Output SEPARATE OUTPUT
Pin Count 16
Operating Supply Voltage 20V
Power Supplies 512/+-15V
Number of Channels 4
Max Supply Voltage 30V
Min Supply Voltage 10V
Nominal Supply Current 100pA
Max Supply Current 100pA
Throw Configuration SPST
Turn On Delay Time 175 ns
Voltage - Supply, Single/Dual (±) 10V~30V ±4.5V~20V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 145 ns
Max Dual Supply Voltage 20V
On-State Resistance (Max) 35Ohm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 9pF 9pF
On-state Resistance Match-Nom 2Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 175ns, 145ns
Charge Injection 5pC
Channel-to-Channel Matching (ΔRon) 2 Ω (Max)
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Normal Position NO
Length 19.175mm
Width 7.62mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $13.489106 $13.489106
10 $12.725572 $127.25572
100 $12.005256 $1200.5256
500 $11.325714 $5662.857
1000 $10.684636 $10684.636
MAX352CPE+ Product Details

MAX352CPE+ Overview


The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around 0°C~70°C TA extended. In total, 16 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Look for analog switch ic variants by searching with MAX352. A 35Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 10V as the lowest voltage for the electrical part. A voltage higher than 100pA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 20VFor dual power supplies, a voltage of at least 4.5V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. This electrical part is compatible with 20V operating voltages.

MAX352CPE+ Features


4 Channels
Switch Circuit: SPST - NO


MAX352CPE+ Applications


There are a lot of Maxim Integrated
MAX352CPE+ Analog Switches & Multiplexers ICs applications.


  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems
  • Sample-and-hold systems
  • Communication systems
  • Data Acquisition Systems
  • Relay Replacement
  • Battery Powered Systems
  • Existing multiplexer applications (both fault-protected and nonfault-protected)

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News