MAX353CSE+T Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. The total number of terminations is 16. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. The electronic part body is injected with 16 pins. A SPST - NO/NC switching circuit is used to build these analog multiplexers. It consists of 4 circuits. Try searching with MAX353 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 35Ohm. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. 10V should be the lowest voltage fed to the electronic component. A voltage higher than 1μA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 20V. If you are using dual power supplies, you should attach at least 4.5V. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating voltages range from 18V.

MAX353CSE+T Features

1 Channels
Switch Circuit: SPST - NO/NC

MAX353CSE+T Applications

There are a lot of Maxim Integrated MAX353CSE+T Analog Switches & Multiplexers ICs applications.

• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Avionics test equipment
• CSU
• Industrial control systems
• Automatic test equipment
• Fiber In The Loop (FITL)
• Low-Voltage
• USB 1.1 signal switching circuits
• Avionics
• Data switching